Calibrations:

10 flats with lamp on and 10 flats with lamp off in JHKs.
HIGH Lamp settings:
J-650
H-450
Ks-380

Use fowler 1.

Observations:

Name       Exp.Time   filter   dither_script      notes
S791-C     10         JHKs     std_3x3_30arcsec   start with this one to do focusing and pointing check
2013cs     60         JHKs     std_3x3_30arcsec   Can see in raw images, so should be fine even if bad seeing
2013da     60         JHKs     std_3x3_30arcsec
2012cg     60         JH       std_5x5_15arcsec   If bad seeing (1.2"+), also run the std_4x4_20arcsec
S791-C     10         JHKs     std_3x3_30arcsec
P330-E     10         JHKs     std_3x3_30arcsec
2013ck     60         JH       std_5x5_15arcsec 
2013ck     60         JH       std_4x4_20arcsec   Do only if bad seeing (1"+)
PTF13ayw   60         JH       std_5x5_15arcsec
PTF13ayw   60         JH       std_4x4_20arcsec   Do only if bad seeing (1"+)
P330-E     10         JHKs     std_3x3_30arcsec
PTF13asv   60         JH       std_4x4_20arcsec   Increase to 5x5_15 if bad seeing
2013bs     60         H        std_4x4_20arcsec
2013bs     60         J        std_5x5_15arcsec

Definitely get 2013da.  Super-LOTIS is getting optical data on this one.

Observe until you cannot guide anymore.  Mind the airmass, try to keep it below 1.8-2.
If there is only 20min left at the end of the night, just keep observing 2013bs in J and H.
If P330-E is not too low you can try getting that again.

There is not much to focus on in 2013ck.  You may want to move to a check star and check the 
focus between dithers.  Don't forget to decrease the exposure time to 4s and unload the dither script.

If you reach the unwrap you can pause the dither script, wait a few minutes, and then hit
resume script.